road traffic signs Spike mainly refers to the road with spike

Spike mainly refers to the road with spike. Also known as road signs. Is a kind of traffic safety facilities. Group is arranged in the middle of road marking the middle reflective road studs‍ or double yellow line road traffic signs, through the retroreflective performance to remind the driver to drive. Spike General specifications for 100mm*100mm*20mm, the highest height of not more than 25mm. There are many reflectors, reflective film, reflective bead, LED luminous, reflective film etc.. Spike installation with epoxy resin installation. The spike has a lot of classification. In accordance with the material can be divided into: A, cast aluminum, plastic spike spike; two; three, four lane, glass ceramic spike; nail; five, reflective bead spike (21 beads and 43 beads, can be merged into aluminum and plastic spike inside) according to the function can be divided into: one, common spike; two, solar spike three, tunnel, cable, radio spike spike; four. According to the number of barricade flashing light‍ the reflecting surface can be divided into: single spike and double spike.

led traffic signs The reasonable layout of LED barricade lights:

1.led barricade lights must clear out the highest point of the obstacles and the edge set obstacle lights, middle layer spacing must be less than 45 meters, the city Zhongbai meters warning beacon lighting‍ high buildings especially considering the intermediate layer and barrier.

Intensity of 2 <150 m tall obstacles for high-voltage transmission cable led traffic signs‍, tower can be white at the top of the marker lamp.

Installation location should not be 3.led barricade lights more than 45 meters, the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to light pollution, obstacle lights position can be located below the chimney mouth 4-6 meters.

4.led barricade lights should be higher than the extra informative traffic signs‍ object 150 meters shall, in high intensity obstacle lights with the use of.

Stars solar traffic sign General traffic barricade light introduction and use

Traffic barricade light! And the ordinary lamps are not the same, the material is power supply system by imports efficient battery plate, maintenance free accumulator, running through the low power led traffic signs‍ consumption control circuit, charge during the day stars solar traffic sign, night shining, ensure the safety of maritime, air navigation, guidance, and ensure the battery can work in normal state, obstacle lamp used for a long time normally, can work in harsh environments.

Traffic barricade light is a kind of red safe light or flashing, is mainly used to obstacle guiding potentially hazardous to aviation, no external power supply, a high-efficiency silicon panels, specially configured for high efficiency and low temperature maintenance free battery power supply system, and can ensure the continuous rainy days to normal work 20 days.

Method of use:

1 in the long time preservation, staff need to obstacle Solar Traffic Sign‍ lights placed in dry place, from time to time, required maintenance time.

2 before the installation and use, will switch to the on position.

3 if traffic barricade light lamp does not light or light is weak, the solar aviation obstacle lamp exposure in the sun can shine 4 hours.

Summarizes the methods and properties of the above traffic barricade light, to make up the difference with the ordinary lamp, lantern is not long on but ablaze, the other is mounted on the highest point of the building and the edge, no matter what kind of obstacle lamp types, staff need to use at the installation when warning beacon lighting‍ considering obstacle lights at the same time and sequence flicker, in order to achieve obvious warning effect.

road traffic signs Solar powered warning light features and advantages

1 solar powered, no cable, whenever and wherever possible to provide clean energy for lighting.

2.solar powered warning light uses lithium LED Traffic Batons‍ iron phosphate battery road traffic signs, long term, energy, environmental protection, the use of more than 5 years free maintenance.

3 super bright LED light source, red, yellow, blue, green and white light source selection, and supporting the 5 color lampshade.

The 4 integrated circuit design, provides 12 kinds of advance flashing mode is good, and can make flash mode switching from an infrared remote controller; and ensure fast charging automatically in the sunlight and cloudy weather.

5.solar powered warning light is poly carbon grease concave exit shell, durable, waterproof, dustproof, 360 degree viewing range up to 3 kilometers.

6 close automatically in the daytime, evening open solar barricade lights‍ automatically, manual open, close.

led traffic signs Led strobe beacon warning light special battery

Safety is our eternal theme, for your safety, we concentrate on creating a series of warning lights, your satisfaction is our motivation, your safety is our mission led traffic signs‍. We wish the new and led traffic signs‍ old customers safe life.

The LED strobe beacon warning light, with two zinc manganese battery as the power source. The function has two kinds, one is often bright, another is the shining brightness, visual distance is 500M, the lamp disc diameter is 19CM, the 4 LED lamp. Packaging for heat shrinkable film packaging. Led strobe beacon warning light: vertebral road lamp using ultra light emitting diode as light source brightness, accurate to remind the people around Caution. * road stud‍ flicker frequency is high, easy to debate, can also be used as a locator used. Intelligent switch, close automatically in the daytime, night automatically boot flash. A battery as a power source, convenient carrying, low cost. Products: traffic road cone lamps, provider Shanghai Shennan traffic facilities limited company provides the road cone lamps, road cones, traffic sign, traffic road cone, traffic road cone lamps, and can effectively remind you and pedestrians pay attention to traffic safety.

Led strobe beacon warning light, the shell is made of high strength polycarbonate material processing, shade color is yellow, red, through fog and strong driving at night, to play a better LED Traffic Batons‍ warning effect, light source adopts a light emitting diode, energy saving, longer work.

Stars solar traffic sign What are the LED Blue beacon light advantage

1 solar powered, no cable, whenever and wherever possible to provide clean energy for lighting.

2.led blue beacon light uses lithium iron Solar Traffic Sign‍ phosphate battery, stars solar traffic sign, energy, environmental protection, the use of more than 5 years free maintenance.

3 super bright LED light source, red, yellow, blue, green and white light source selection, and supporting the 5 color lampshade.

4.led blue beacon light is an integrated circuit design, provides 12 kinds of advance flashing mode is good, and can make flash mode switching from an infrared remote controller; and ensure fast charging automatically in the sunlight and cloudy weather.

5 poly carbon grease concave exit shell, durable, waterproof, Road traffic signs‍ dustproof, 360 degree viewing range up to 3 kilometers.

6 close automatically in the daytime, evening open automatically, manual open, close.‍

Stars solar traffic sign Stars solar traffic sign, LED traffic signs, road traffic signs

Various classification of solar traffic sign

Solar traffic sign is composed of a marking on Road safety studs‍ the road the various lines, arrows, text, elevation, road signs marking and contour standard of traffic safety facilities. Its role is to control and guide the traffic. And sign with the use, and can also be used alone.

Solar traffic sign according to the set mode can be divided into the following three categories:

A) driving direction setting longitudinal markings along the road marking;

B) angle is arranged into transverse markings and traffic direction marking;

C) other marking character mark or other forms of marking.

Road traffic marking according to the functions can be divided into the following three categories:

A) indicating line indicates the roadway, driving direction, edge of pavement, pavement markings such facilities.

B) prohibited marking signs, road traffic, led traffic signs‍ do prohibit restrictions special provisions, vehicle drivers and pedestrians must strictly obey the marking.

C) warning marking the vehicle drivers and pedestrians on the road of special circumstances, to alert, ready to prevent strain measure reticle.

Solar traffic sign according to the pattern can be divided into the following four categories:

A) lines marking on the pavement, curb or elevation, solid or dashed lines.

B) character marking text, digital and graphic symbols marked on the road.

C) road signs installed on the road is used to mark the lane boundaries, edge, sub confluent, bend, the dangerous section of the road, road width, road surface changes the position of the obstacle reflecting or non reflecting body.

D) installed on the roadside wire outline Road traffic signs‍ mark on both sides of the road, using reflective column to indicate the road direction, the roadway boundary contour (or piece).

road traffic signs Solar traffic sign marking classified as follows

A) white dotted zoned in on the road, used to separate the traffic flow in the same direction or as a safety distance identification line; zoned in on the road, to guide the warning signal light‍ vehicle.

B) solid white lines on the road when designated, to separate traveling the same direction of motor vehicles and non motor vehicle lanes, or directed edge; a road, can be used as a guide for lane or the stop line.

C) yellow dashed line in the middle section, used to separate the traffic flow in opposite directions. Drawing on the side or edge stone, to prohibit park on the side of the road vehicle length.

D) yellow solid zoned in on the road, Solar Traffic Sign‍ used to separate the traffic flow in opposite directions; draw on the side or edge of the stone, to prohibit vehicles in long-term or temporary roadside park.

E) white dashed line to the junction, as the deceleration lane; in the road, as the traffic direction variable changes over time Lane line.

F) double yellow lines zoned in on the road, used to separate the traffic flow in opposite directions.

G) yellow broken line in the middle section, used to separate the traffic flow in opposite directions. The yellow solid line prohibits vehicles overtaking, crossing or turning, yellow dotted line side in ensuring the safety Road safety studs‍ of the vehicle to allow overtaking, crossing or turning.

H) double white lines designated in the intersection, as parking lane.‍

led traffic signs How to understand the traffic control baton?

Traffic control baton is divided into two kinds, one is used for command vehicle red, yellow, green color signal light, set in the local intersections conspicuous, called vehicle solar traffic sign‍ traffic lights; the other one is for red, green and white light signal command pedestrians crossing the road, is arranged at two ends of pedestrian crossing., called the crosswalk lights. Our traffic regulations also made provisions on traffic command signal lamp:

1) when the green light is on, it allows the vehicles, pedestrians, vehicles are not allowed to turn but hinder the straight vehicle and pedestrian traffic was led beacon light‍ released.

2) traffic control baton yellow light, no cars, pedestrians, but has crossed the stop line of vehicles and has entered the pedestrians in crosswalks, may continue to pass.

3) when the red light, no vehicles, pedestrians.

4) the green arrow light is on, it allows the vehicles to pass the direction indicated by the arrow.

5) the yellow light flashing, vehicles, warning signal light‍ pedestrians may pass to ensure that the principle of security.

Stars solar traffic sign LED flashing traffic sign note

Novice because there is no feeling of LED flashing traffic sign, so the most prone to violate traffic marking behavior. At the same time because of the traffic signs do led solar warning light‍ not understand or not in time, but also prone to go wrong, go wrong road. These are all can hardly be avoided.

1, in order to facilitate the observation of LED flashing traffic sign, a novice in the car to pay attention to the signs on the roadside, is far higher, vision, understand the traffic signs indicating meaning after operation.

2, the other near the intersection, in the driveway will guide signs, the novice often because on the front, while ignoring the orientation of traffic signs on the road, leading to the violation or go astray. Therefore drivers to road ahead to reduce speed in advance, observe the road and at the junction solar traffic sign‍ ahead of traffic signs, the correct choice of route for their.